Forklifts Telehandler::
42' 6K Telehandler Skytrak 6042

• Weight
• 23,520 lb (10,669 kg) [Without Carriage and Forks]
• DIMENSIONS
• Length (less forks): 232 in. (5.89 m)
• Width: 98 in. (2.48 m)
• Height: 102 in. (2.59 m)
• Wheelbase: 113 in. (2.87 m)
• Ground Clearance: 16 in. (406 mm)
• Outside Turning Radius: 168 in. (4.26 m)
• Max. Reach from Front Tires to 24 in. (609 mm) Load Center: 27.9 ft (8.50 m)
• PERFORMANCE
• Rated Capacity: 6,000 lb (2,722 kg)
• Maximum Lift Height: 41 ft 11 in. (12.7 m)
• Frame Leveling: 10˚
• Lift Speed (boom retracted)
• Up: 17.5 sec
• Down: 11 sec
• Boom Speed
• Extend: 19 sec
• Retract: 19 sec
• Travel Speed Forward
• 4-Speed Forward: 20 mph (32 kmph)
• Drawbar Pull: 23,580 lb (10,695 kg)
• Operating Weight Without Carriage and Forks: 23,520 lb (10,669 kg)
• STANDARD SPECIFICATIONS
• Engine: Make and Model Cummins 4BT3.9 Turbo
• Fuel: Diesel
• Cycles: 4
• No. of Cylinders: 4
• Displacement: 239 cu in (3.9 L)
• Torque Rating: 305 lb ft (414 Nm) @ 1,500 rpm
• Rated Speed: 2,500 rpm
• Max. Gross BHP: 99 hp (74 kW)
• Fuel Tank: 35 gal (132 L)
• ENGINE FILTERS
• Two-stage dry air cleaner — centrifugal pre-cleaner with continuous dust ejector and replaceable dry filter element. Replaceable spin-on fuel filter. Full-flow replaceable spin-on engine oil filter.
• ELECTRICAL SYSTEM
• Voltage: 12V
• Alternator: 65 amp
• Battery: 850 cold cranking amps at 0°F
• TRANSMISSION
• Modulated powershift. 4-speed forward and 3-speed reverse.
• AXLES
• Full-time planetary 4-wheel drive. Oscillating rear axle with Stabil-TRAK™ System.
• SERVICE BRAKES
• Hydraulically actuated inboard wet disc brakes.
• PARKING BRAKES
• Emergency brake with transmission declutch feature.
• TIRES
• Standard: Air-filled 13.00 x 24 — 12 ply
• Optional: 13.00 x 24 foam-filled; 13.00 x 24 rock tires
• CAB
• Certified ROPS/FOPS structure. Deluxe suspension seat with retractable seat belt. Rear view mirrors. Lockable covers.
• STEERING
• 4-Wheel Power steering. Operator selectable 4-wheel circle, 4-wheel crab, 2-wheel front.
• INSTRUMENTS
• Instrument cluster with gauges and warning lights.
• CONTROLS
• Dual joystick controls. Proportional frame tilt, fork tilt and auxiliary hydraulics.
• HYDRAULIC SYSTEM
• • Implement Piston pump.
• • 60 gal (225 L) system capacity.
• • Variable flow, load sensitive hydraulic system.
• • Load holding valves on frame level, stabilizer, attachment tilt, extend and lift cylinders.
• AUXILIARY HYDRAULICS
• Used for all attachments equipped with cylinders or other hydraulic components. Consists of valves, controls, and hydraulic lines.
• ACCESSORIES & OPTIONS
• • Enclosed All Weather Cab
• • Basic Work Lights
• • Complete Road Lights
• • Rotating Beacon
• • Fenders
• ATTACHMENTS
• Standard Carriage
• 48 in. (1.2 m), 60 in. (1.5 m) or 72 in. (1.8 m)
• ± 10° Side Tilt Carriage
• 48 in. (1.2 m), 60 in. (1.5 m) or 72 in. (1.8 m)
• ± 45° Swing Carriage
• 72 in. (1.8 m)
• Pallet Forks
• 2 x 4 x 48 in. (51 mm x 102 mm x 1.2 m)
• Lumber Forks
• 1.75 x 7 x 60 in. (45 mm x 178 mm x 1.5 m)
• Block Forks
• 2 x 2 x 48 in. (51 mm x 51 mm x 1.2 m)
• Wallboard/Sheet Material Handler
• Utility Bucket
• 1.25 cu yd (0.95 m3)
• Concrete Bucket
• 0.5 cu yd (0.38 m3)
• Truss Boom
• 12 ft (3.7 m)
• Truss Boom With Winch
• 3 ft (91 cm)
• Hydraulic Earth Auger